Lubricants Start kliester Red wet +

Wet or icy snow almost always requires a clamp-based grip lubrication, as the solid jar lubricants are not soft and tough enough to achieve the necessary grip. The Start collection has a very good selection of clamps to suit different conditions.

TheSTART standard range of clamps are floorless grip systems for both competitors and amateurs.

– Wet snow
– Weight: 55 g

Apply a very thin layer of the base of the base layer on the ski base. Warm up the tube to remove the base coat from the tube. Smooth the base coat with a warm grease stick so that the base coat covers the entire grip area evenly. Smooth with a thumb or synthetic cork and cool the ski.
Apply the temperature-appropriate conditioner drop by drop to the grip area, so that the conditioner droplets are in a regular line about 5 cm apart on either side of the ski boot guide zone. Use either a thumb or a cork stick to spread the clinker to form an even layer. Clean the guide zone and the sides of the skis of excess glue.
When mixing, drizzle the different types of clinker onto the base of the ski and rub with your thumb, mixing the clinker together.
Allow the skis to cool properly before skiing.