Brush Start BRASS/BRONZE

Description

The brush is used to clean the sliding areas of the ski base from excess paraffin, to open up the structure of the ski base and to polish the ski base. Proper brushing ensures an excellent glide. MESSING BRUSH – For cleaning the structure of the ski base Instructions for use After removing excess lubrication with a chisel, slide the metal brush from the nose towards the heel until the structure of the ski base is clearly visible. Next, brush the base of the ski clean with a nylon brush. If there is a possibility/desire to use different brushes, the principle is to start with the coarser brush. A brass brush is used first, followed by a copper brush, then a steel brush, then a strong nylon brush, then a softer nylon brush, and if powder is used for lubrication, a low bristle soft nylon brush last. Use metal brushes for brushing in one direction only (mark an arrow on the brush so you always use the same direction). For the amateur, a brass brush and a sturdy nylon brush will suffice for satisfactory results.